1. What Bluetooth release does the HBC100plus, HBC200, and HBC200HD use?

All our units currently use the 2.1 bluetooth as of 6/12/2015 after 6/12/ Bluetooth 3.0

2. Do you offer any video help assistance?

Yes, we have created a series of videos that will assist with many installation and setup questions. These are all available button link below: you_tube_Icon

3. What are the system priorities of my UCLEAR?

UCLEAR Digital controller units have the following priorities: 1.Phone 2.Intercom 3.Music For example, if a call comes in while listening to music, the call will take priority. When the call is terminated, the music will automatically come back on. You can switch from music to intercom or vice versa. Note: For best results, it is recommended to try to use your phone as a main connection for Phone calls, Music and GPS functions.

4. What affects the wind noise suppression?

Air pressure affects sound waves, so how your helmet fits will affect the performance, as will the presence or absence of a bike windshield. Well fitting, full faced helmets will always enhance performance. Experiment with directional placement of speakers to achieve ideal sound (Note, both speakers must always be facing in the same direction and symmetrical to each other for best sound).

5. What types of Bluetooth devices can be paired to my UCLEAR at the same time?

With our latest firmware, we now offer multi-point connectivity, meaning you can now have 2 Bluetooth devices paired to your unit. Whether it be Phone, MP3 Player, or GPS. You can now stay connected to even more things that matter to you with UCLEAR Digital. Most certified Bluetooth devices should work, But we recommend for best performance to use a single unit such as your phone for Phone calls, Music and GPS.

6. Which products offer private intercom?

The HBC200 series and AMP Pro will offer private intercom.

7. Will my intercom time out?

No, after intercom is started it will not auto timeout. You need to terminate it manually. However, the unit will auto power off in two hours if intercom and all other Bluetooth devices are disconnected. If intercom has not been in use before, the unit will auto power off in 10 minutes if all Bluetooth devices are disconnected.

8. If I am in intercom mode when I power down, will UCLEAR remain in intercom mode when powered back up?

Intercom will not stay connected one the unit is powered off. Once the UCLEAR controller unit is powered back on, you will need to press and hold the up button for two seconds to engage the intercom mode once again.

9. What are UCLEAR's temperature ratings?

The HBC100 series is rated from -20ºC (-4ºF) to 60ºC (140ºF). 2. The HBC100 PLUS series, HBC200 series and AMPS are rated from -30ºC (-20ºF) to 60ºC (140ºF).

10. Is private intercom possible with all members of a riding group using UCLEAR?

Private intercom is currently only available to the HBC200 series and AMP series. Private intercom can only work with the user directly connected to you. For example, you have A, B, C, D connected, AB and CD can have private intercom but AC or AD cannot. See your manual for more detail.

11. How do I activate voice commands or hands free answering?

You can pick up calls hands free by saying “hello” or “pick up”. To utilize more advanced voice features, it depends on the capabilities of your paired device. For example, if you have voice activation software (i.e. Siri, Google now, Nuance, Dragon or Vlingo) on your device, you can activate these by pressing the “Answer” and “Down” buttons on your UCLEAR control unit.

12. I’m using GPS app on my phone, and it’s not interrupting my intercom…why?

The GPS application actually streams messages through A2DP Bluetooth profile. A2DP has a lower priority than the intercom.

13. Will UCLEAR work with my helmet?

You can install UCLEAR Digital products on just about any helmet (Full face, open face, modular or 1/2 helmets). As long there is space for the speakers or ear buds. In the case of fuller helmets, there should be a cutout, and in the case of half helmets, we offer an insert that wraps around the straps. *UCLEAR Digital does NOT recommend modifying your helmet. Whatever your helmet type, it’s through Adaptive Beam Forming technology that UCLEAR is able to suppress environment noise such as wind, engine and street noise, while picking up on your voice. Boomless is just better!

14. Can I pair my UCLEAR with another brand Bluetooth communication system?

YES! With our latest firmware update you can pair with other brand Bluetooth communication systems. The HBC100 Plus series, HBC200 series and AMP series are now cross brand compatible, so you can connect to other brand helmet communication systems. UCLEAR plays well with others! Note: With the amount of technology needed to play with other brands, cross brand connections will limit functionality.

15. Which UCLEAR is right for me?

The difference between UCLEAR products has to do with intercom range and the number of users, as well as mounting options that come in the package. So to determine which option is right for you, first determine how many people you want to connect with and what intercom range you need. The HBC100: series offers 2 person intercom, has a range of 30 feet and is meant for rider to rider to rider to passenger communication. This series is NOT firmware upgradable. The HBC100 PLUS: series offers 4 person intercom and has a range of .30 miles between users. This series is firmware upgradable. The HBC200 series: can connect 10 or more people and offers up to .40 miles between 10+ users. This series is firmware upgradable. Amp Series: Refer to this AMP link to see the difference in the AMP series.

16. How long is the battery life of a UCLEAR unit?

With a full charge, UCLEAR units will have about 10+ hours of talk time and 400 hours (16.6 days) of standby time.

17. How does the noise suppression technology work?

UCLEAR Digital’s advanced digital microphone array technology eliminates the need for a close-talk microphone. UCLEAR’s superior approach to noise suppression separates wanted audio information from unwanted noise with the use of multi stage processing, using multiple Digital Signal Processing (DSP) based algorithms. Its purpose is to create an extremely versatile algorithm to handle a variety of noise types and other acoustical issues that would normally disrupt mobile communications. This technology forms a beam or “sweet spot” around your mouth that picks up your voice while intelligently eliminating environmental noise such as engine or wind noise.

18. What does full duplex mean?

Full Duplex means that instead of traditional two-way walkie-talkie communication where only one person can talk at any given time, conversation back and forth between several people can happen at the same time. Similar to today’s cell phone conversations. The UCLEAR Digital intercom function allows for conversation to occur simultaneously.

19. Will UCLEAR work with my phone?

UCLEAR Digital units will work with most Bluetooth capable phones or devices. UCLEAR supports the latest Bluetooth version, EDR and profiles A2DP/AVRCP, HFP, HSP and intercom. Check your phone manual to see if it supports these Bluetooth profiles.

20. What UCLEAR units are compatible with each other?

The HBC100 can only connect to another HBC100. 2. The HBC100 Plus is compatible with other HBC100 Plus units, HBC200 units and HBC200 HD units. 3. AMP Series units can connect to all AMP series units, HBC 100 PLUS, HBC200 and HBC200 HD units. * Please note that the units must be on the same firmware version in order to pair correctly.

1. I get no sound from my UCLEAR Unit?

Once your speakers are plugged in, you will be able to hear the startup and shut down chirps. Even with blown speakers. IF you DO NOT hear anything, please double check and make sure the three lines(or ribs) on the USB speaker port are completely inserted into the control unit.

2. I recently updated my units and now nothing works.

After an update it is recommended to redo all your pairings on your Uclear Digital controllers. Some settings have changed with the update and to have everything working as intended, you will need to redo your pairings.

3. My sound defaults to the iPhone speaker and not the UCLEAR Head Set.

On your iPhone, Go to Settings –> General –> Accessibility –> Call Audio Routing, Change the setting to “Head Set”. If this doesn’t fix it, please delete all non-needed saved Bluetooth connections and reset your phone. Then re-pair to the iPhone to the UCLEAR Digital Unit.

4. I Can't load firmware update, I Keep getting a virus Warning.

Before you open and install the latest UCLEAR Firmware update, Disable any Anti-Virus protection installed on your computer. Note: Re-Enable your Virus protection after successful Firmware Update.

5. How do I pair my UCLEAR Digital unit with my GPS?

Try these tips to get your GPS to pair with the UCLEAR unit: 1. Shut down both the UCLEAR and GPS. 2. Restart the devices and re-pair the UCLEAR to the GPS. 3. Once paired, shutdown and restart both devices. You may also try deleting all the Bluetooth records from the GPS, restart then re-try pairing again. 4. Finally, assume the GPS has been successfully paired to the phone and UCLEAR unit. If all these devices are powered up at the same time, it may cause confusion to the GPS. Your UCLEAR should be the last device to be turned on, then let it auto connect to the GPS.

6. How do I get better sound?

Sound quality and voice activation features are dependent on the capabilities of you master pairing device (e.g. mobile phone). For the best sound quality Pair the UCLEAR Unit Directly to the source (Cell Phone is preferred). After Doing so adjust the volume levels of your master pairing device to 70% or until you achieve the best results.

7. I can’t hear any bass, and the music is quiet or tingy. How can I fix this?

When music sounds tinny, this is often due to streaming music through Hands Free Profile (HFP) instead of Advanced Audio Distribution Profile (A2DP). It may also be due to the quality of music that you may be using. Try to assure that the music quality is at 128/KBPS (CD quality) or better for best results. Note: Pandora/Spotify does not always stream CD quality music.

8. How do I pair my UCLEAR Digital controller to my phone or device?

The exact steps depend on your mobile phone or device, but generally, you should ensure the Bluetooth feature has been activated on your device. Turn your UCLEAR control unit on. Press the Up and Down buttons on your UCLEAR unit to enable pairing. You should see your UCLEAR come up on your device as an option and be able to select it on the device. If your device asks for a passcode, it is 0000. Please also take a look at our User manuals: User Manuals

9. How can I tell which profile mode my device is in?

Try double tapping the UCLEAR power button to start or stop your music. If the music doesn’t start or stop, you’re in Hands Free Profile (HFP). For best sound quality and results, your main device should be in A2DP profile.

10. I just got my UCLEAR system - what should I do first?

Your unit comes with some charge, BUT it is best to fully charge it upon taking it out of the box before use. Visit UCLEAR-Digital.com to ensure your UCLEAR controller unit has the most up to date firmware to take advantage of feature enhancements. (Note this is not applicable to the HBC100 series.) Further, check your phone to ensure it is up to date with its own latest software.

11. How do I install the UCLEAR controller unit onto my helmet?

UCLEAR products come with a variety of options, and we also offer additional mounting accessories for purchase at UCLEARDigital.com. Options include a removable clip with a rubber grip that is secured on the helmet shell between the padding. The second, a more permanent option is a bracket with 3M double sided tape that is adhered to the outside of the helmet. Basic UCLEAR Installation Video can be found in the link below: you_tube_Icon

12. How do I position the speakers in my helmet?

The speakers can be positioned on either side of the cheek pads. If you have trouble hearing, you may want to bring the speaker closer to the ear. The microphones are able to pick up on your voice even if they are behind the padding of your helmet, as long as the fabric is breathable. Note that ABF technology will not transmit through solid, non-breathable materials such as plastic, metal and leather. For the best audio quality, the left and right microphones have to be installed symmetrically in your helmet and directly over your ear, with the microphones pointing out at the same angle. The microphones work in tandem, and if they are not aligned properly they will not pick up on your voice as intended by our system. Video Step by Step Installation Link below: you_tube_Icon

13. How can I set the volume on my UCLEAR controller unit?

You can set the volume by pushing the up/down buttons to increase/decrease the volume. You must push and release for each incremental change in volume. When the volume level is set, the controller unit will store that volume setting, so the next time the device is connected it will automatically start at that associated volume level. UCLEAR also uses Automatic Speaker Loudness for communication. This feature increases the volume depending on the environment noise level. However, you can still adjust the volume manually.

14. How do I correctly install the permanent helmet mount?

*The helmet mount is best installed at room temperature. Please let the adhesive set for 5 minutes after installation for best performance. 1. Identify a position on the helmet to adhere the metal mounting bracket. 2. Clean the identified surface area with alcohol. 3. Peel off the double sided tape protective film. 4. Carefully place the metal mounting bracket onto the position identified in step 1, making sure that the bracket is installed with the metal prong facing down. 5. Apply slight pressure onto the metal mounting bracket to ensure it is firmly secured. (Make sure that the majority of the adhesive is in contact with your helmet for best results)

15. How do I make sure my unit is protected against weather?

Please make sure the speaker connection is fully inserted into the controller unit. This is done by pushing the speaker USB head into the control unit until you can no longer see the three ribs on the speaker USB plug. This ensures a full audio connection and a weatherproof seal.

16. Do you offer any video help assistance?

Yes, we have created a series of videos that will assist with many installation and setup questions. These are all available button link below: you_tube_Icon

17. Should I pair my UCLEAR first to the phone or another UCLEAR unit?

First pair it to your device (Phone, MP3, GPS), and then proceed with the pairing process for intercom to another UCLEAR unit.

18. What affects the wind noise suppression?

Air pressure affects sound waves, so how your helmet fits will affect the performance, as will the presence or absence of a bike windshield. Well fitting, full faced helmets will always enhance performance. Experiment with directional placement of speakers to achieve ideal sound (Note, both speakers must always be facing in the same direction and symmetrical to each other for best sound).

19. If I am in intercom mode when I power down, will UCLEAR remain in intercom mode when powered back up?

Intercom will not stay connected one the unit is powered off. Once the UCLEAR controller unit is powered back on, you will need to press and hold the up button for two seconds to engage the intercom mode once again.

20. How do I perform a reboot on my UCLEAR Digital unit?

When the Unit is powered on, Press and hold down all three buttons at the same time until you see the power light go out and the controller unit turn off.

21. Do units need to have the same firmware version in order to pair correctly?

Yes, all units must be on the same firmware version in order to pair correctly. You can check what firmware you are currently running using the firmware update software. For Amp Series you are able to check you CLEARLink app to see what version Firmware you are on.

22. The sound is bad through my GPS, what should I do?

The GPS may default to HFP for streaming music if you activate music playback manually from the GPS versus through your UCLEAR unit. To get the GPS device to stream through A2DP/AVRCP, please double tap the power button twice on your UCLEAR to trigger the A2DP profile first, and then start the music from the GPS. Note: We recommend that for best performances that a phone should be the main source for Phone calls, Music, GPS. Tethering connection can affect sound quality.

23. I can hear fine, but the person calling me can't hear me?

The main problem with callers not hearing your voice has to do with positioning of microphones. They must be installed symmetrically on both sides of your helmet, pointing forward and at the same angle. If the positioning of the microphones are off 5% or more, voice quality will start to suffer. If off 15% or more, your voice will sound muffled or distant.

1. Who do I talk to for warranty?

Please ensure that you have registered your product online. Then create a support ticket, and our customer support team will take care of you. UCLEAR Digital warranty policies can be found here.

2. Can I try UCLEAR Digital products before I buy it?

Some dealers do have demo units that you can test in their shop before purchasing. If you purchased the UCLEAR unit directly from UCLEAR-Digital.eu from our store, we offer a 14 day money back guarantee, so although you have to buy it first, if you don’t absolutely love it (Which we know you will), you have 14 days to get it back to us! The 14 Day Satisfaction Guarantee is ONLY applied to the UCLEAR-Digital Online store. If UCLEAR-Digital products are bought from a dealer new, the dealer’s refund policy will apply and may vary from dealer to dealer. Please check with the Dealer you purchase your unit from to verify their return policy

3. Where can I purchase UCLEAR Digital products?

UCLEAR Digital product can be purchased through our online store at: UCLEAR-Digital.eu Motorcycle products (HBC200 Series, HBC100 Plus series, and AMP) are also sold though Powersport dealers and retail stores. Please visit our dealer locator to find a retailer near you!

4. Which UCLEAR is right for me?

The difference between UCLEAR products has to do with intercom range and the number of users, as well as mounting options that come in the package. So to determine which option is right for you, first determine how many people you want to connect with and what intercom range you need. The HBC100: series offers 2 person intercom, has a range of 30 feet and is meant for rider to passenger communication. This series is NOT firmware upgradable. The HBC100 PLUS: series offers 4 person intercom and has a range of 500m between users. This series is firmware upgradable. The HBC200 series: can connect  10 or more people and offers up to 700m between 10+ users. This series is firmware upgradable. Amp Series: Refer to this AMP link to see the difference in the AMP series.

1. What Bluetooth release does the HBC100plus, HBC200, and HBC200HD use?

All our units currently use the 2.1 bluetooth as of 6/12/2015 after 6/12/ Bluetooth 3.0

2. I get no sound from my UCLEAR Unit?

Once your speakers are plugged in, you will be able to hear the startup and shut down chirps. Even with blown speakers. IF you DO NOT hear anything, please double check and make sure the three lines(or ribs) on the USB speaker port are completely inserted into the control unit

3. I recently updated my units and now nothing works.

After an update it is recommended to redo all your pairings on your Uclear Digital controllers. Some settings have changed with the update and to have everything working as intended, you will need to redo your pairings.

4. My sound defaults to the iPhone speaker and not the UCLEAR Head Set.

On your iPhone, Go to Settings –> General –> Accessibility –> Call Audio Routing, Change the setting to “Head Set”. If this doesn’t fix it, please delete all non-needed saved Bluetooth connections and reset your phone. Then re-pair to the iPhone to the UCLEAR Digital Unit.

5. I Can't load firmware update, I Keep getting a virus Warning.

Before you open and install the latest UCLEAR Firmware update, Disable any Anti-Virus protection installed on your computer. Note: Re-Enable your Virus protection after successful Firmware Update.

6. How do I pair my UCLEAR Digital unit with my GPS?

Try these tips to get your GPS to pair with the UCLEAR unit: 1. Shut down both the UCLEAR and GPS. 2. Restart the devices and re-pair the UCLEAR to the GPS. 3. Once paired, shutdown and restart both devices. You may also try deleting all the Bluetooth records from the GPS, restart then re-try pairing again. 4. Finally, assume the GPS has been successfully paired to the phone and UCLEAR unit. If all these devices are powered up at the same time, it may cause confusion to the GPS. Your UCLEAR should be the last device to be turned on, then let it auto connect to the GPS.

7. How do I get better sound?

Sound quality and voice activation features are dependent on the capabilities of you master pairing device (e.g. mobile phone). For the best sound quality Pair the UCLEAR Unit Directly to the source (Cell Phone is preferred). After Doing so adjust the volume levels of your master pairing device to 70% or until you achieve the best results.

8. I can’t hear any bass, and the music is quiet or tingy. How can I fix this?

When music sounds tinny, this is often due to streaming music through Hands Free Profile (HFP) instead of Advanced Audio Distribution Profile (A2DP). It may also be due to the quality of music that you may be using. Try to assure that the music quality is at 128/KBPS (CD quality) or better for best results. Note: Pandora/Spotify does not always stream CD quality music.

9. How do I pair my UCLEAR Digital controller to my phone or device?

The exact steps depend on your mobile phone or device, but generally, you should ensure the Bluetooth feature has been activated on your device. Turn your UCLEAR control unit on. Press the Up and Down buttons on your UCLEAR unit to enable pairing. You should see your UCLEAR come up on your device as an option and be able to select it on the device. If your device asks for a passcode, it is 0000. Please also take a look at our User manuals: User Manuals

10. How can I tell which profile mode my device is in?

Try double tapping the UCLEAR power button to start or stop your music. If the music doesn’t start or stop, you’re in Hands Free Profile (HFP). For best sound quality and results, your main device should be in A2DP profile.

11. Do you offer any video help assistance?

Yes, we have created a series of videos that will assist with many installation and setup questions. These are all available by clicking the button below. you_tube_Icon

12. I just got my UCLEAR system - what should I do first?

Your unit comes with some charge, BUT it is best to fully charge it upon taking it out of the box before use. Visit UCLEAR-Digital.com to ensure your UCLEAR controller unit has the most up to date firmware to take advantage of feature enhancements. (Note this is not applicable to the HBC100 series.) Further, check your phone to ensure it is up to date with its own latest software.

13. How do I install the UCLEAR controller unit onto my helmet?

UCLEAR products come with a variety of options, and we also offer additional mounting accessories for purchase at UCLEARDigital.com. Options include a removable clip with a rubber grip that is secured on the helmet shell between the padding. The second, a more permanent option is a bracket with 3M double sided tape that is adhered to the outside of the helmet. Basic UCLEAR Installation Video can be found in the link below: you_tube_Icon

14. How do I position the speakers in my helmet?

The speakers can be positioned on either side of the cheek pads. If you have trouble hearing, you may want to bring the speaker closer to the ear. The microphones are able to pick up on your voice even if they are behind the padding of your helmet, as long as the fabric is breathable. Note that ABF technology will not transmit through solid, non-breathable materials such as plastic, metal and leather. For the best audio quality, the left and right microphones have to be installed symmetrically in your helmet and directly over your ear, with the microphones pointing out at the same angle. The microphones work in tandem, and if they are not aligned properly they will not pick up on your voice as intended by our system. Video Step by Step Installation Link below: you_tube_Icon

15. How can I set the volume on my UCLEAR controller unit?

You can set the volume by pushing the up/down buttons to increase/decrease the volume. You must push and release for each incremental change in volume. When the volume level is set, the controller unit will store that volume setting, so the next time the device is connected it will automatically start at that associated volume level. UCLEAR also uses Automatic Speaker Loudness for communication. This feature increases the volume depending on the environment noise level. However, you can still adjust the volume manually.

16. How do I correctly install the permanent helmet mount?

*The helmet mount is best installed at room temperature. Please let the adhesive set for 5 minutes after installation for best performance. 1. Identify a position on the helmet to adhere the metal mounting bracket. 2. Clean the identified surface area with alcohol. 3. Peel off the double sided tape protective film. 4. Carefully place the metal mounting bracket onto the position identified in step 1, making sure that the bracket is installed with the metal prong facing down. 5. Apply slight pressure onto the metal mounting bracket to ensure it is firmly secured. (Make sure that the majority of the adhesive is in contact with your helmet for best results)

17. How do I make sure my unit is protected against weather?

Please make sure the speaker connection is fully inserted into the controller unit. This is done by pushing the speaker USB head into the control unit until you can no longer see the three ribs on the speaker USB plug. This ensures a full audio connection and a weatherproof seal.

18. Who do I talk to for warranty?

Please ensure that you have registered your product online and have your proof of purchase handy. Then call 1-855-BIT-WAVE (1-855-248-9283), and our customer support team will take care of you. UCLEAR Digital warranty policies can be found here.

19. Can I try UCLEAR Digital products before I buy it?

Some dealers do have demo units that you can test in their shop before purchasing. If you purchased the UCLEAR unit directly from UCLEAR-Digital.com or over the phone from our store, we offer a 14 day money back guarantee, so although you have to buy it first, if you don’t absolutely love it (Which we know you will), you have 14 days to get it back to us! The 14 Day Satisfaction Guarantee is ONLY applied to the UCLEAR-Digital Online store. If UCLEAR-Digital products are bought from a dealer new, the dealer’s refund policy will apply and may vary from dealer to dealer. Please check with the Dealer you purchase your unit from to verify their return policy.

20. I followed the manual and nothing’s working…

Please create a ticket at the technical support team. We’re happy to help! Currently technicians will be available from 8:30AM – 16:00PM CEST, Monday to Friday.We will respond with an Email within 48 hours.

21. Where can I purchase UCLEAR Digital products?

Find your nearest dealer at the Dealer Locator 

22. Do you offer any video help assistance?

Yes, we have created a series of videos that will assist with many installation and setup questions. These are all available button link below: you_tube_Icon

23. Should I pair my UCLEAR first to the phone or another UCLEAR unit?

First pair it to your device (Phone, MP3, GPS), and then proceed with the pairing process for intercom to another UCLEAR unit.

24. What are the system priorities of my UCLEAR?

UCLEAR Digital controller units have the following priorities: 1.Phone 2.Intercom 3.Music For example, if a call comes in while listening to music, the call will take priority. When the call is terminated, the music will automatically come back on. You can switch from music to intercom or vice versa. Note: For best results, it is recommended to try to use your phone as a main connection for Phone calls, Music and GPS functions.

25. What affects the wind noise suppression?

Air pressure affects sound waves, so how your helmet fits will affect the performance, as will the presence or absence of a bike windshield. Well fitting, full faced helmets will always enhance performance. Experiment with directional placement of speakers to achieve ideal sound (Note, both speakers must always be facing in the same direction and symmetrical to each other for best sound).

26. What types of Bluetooth devices can be paired to my UCLEAR at the same time?

With our latest firmware, we now offer multi-point connectivity, meaning you can now have 2 Bluetooth devices paired to your unit. Whether it be Phone, MP3 Player, or GPS. You can now stay connected to even more things that matter to you with UCLEAR Digital. Most certified Bluetooth devices should work, But we recommend for best performance to use a single unit such as your phone for Phone calls, Music and GPS.

27. Which products offer private intercom?

The HBC200 series and AMP Pro will offer private intercom.

28. Will my intercom time out?

No, after intercom is started it will not auto timeout. You need to terminate it manually. However, the unit will auto power off in two hours if intercom and all other Bluetooth devices are disconnected. If intercom has not been in use before, the unit will auto power off in 10 minutes if all Bluetooth devices are disconnected.

29. If I am in intercom mode when I power down, will UCLEAR remain in intercom mode when powered back up?

Intercom will not stay connected one the unit is powered off. Once the UCLEAR controller unit is powered back on, you will need to press and hold the up button for two seconds to engage the intercom mode once again.

30. What are UCLEAR's temperature ratings?

1. The HBC100 series is rated from -20ºC (-4ºF) to 60ºC (140ºF). 2. The HBC100 PLUS series, HBC200 series and AMPS are rated from -30ºC (-20ºF) to 60ºC (140ºF).

31. Is private intercom possible with all members of a riding group using UCLEAR?

Private intercom is currently only available to the HBC200 series and AMP series. Private intercom can only work with the user directly connected to you. For example, you have A, B, C, D connected, AB and CD can have private intercom but AC or AD cannot. See your manual for more detail.

32. How do I activate voice commands or hands free answering?

You can pick up calls hands free by saying “hello” or “pick up”. To utilize more advanced voice features, it depends on the capabilities of your paired device. For example, if you have voice activation software (i.e. Siri, Google now, Nuance, Dragon or Vlingo) on your device, you can activate these by pressing the “Answer” and “Down” buttons on your UCLEAR control unit.

33. I’m using GPS app on my phone, and it’s not interrupting my intercom…why?

The GPS application actually streams messages through A2DP Bluetooth profile. A2DP has a lower priority than the intercom.

34. How do I perform a reboot on my UCLEAR Digital unit?

When the Unit is powered on, Press and hold down all three buttons at the same time until you see the power light go out and the controller unit turn off.

35. Do units need to have the same firmware version in order to pair correctly?

Yes, all units must be on the same firmware version in order to pair correctly. You can check what firmware you are currently running using the firmware update software. For Amp Series you are able to check you CLEARLink app to see what version Firmware you are on.

36. Will UCLEAR work with my helmet?

You can install UCLEAR Digital products on just about any helmet (Full face, open face, modular or 1/2 helmets). As long there is space for the speakers or ear buds. In the case of fuller helmets, there should be a cutout, and in the case of half helmets, we offer an insert that wraps around the straps. *UCLEAR Digital does NOT recommend modifying your helmet. Whatever your helmet type, it’s through Adaptive Beam Forming technology that UCLEAR is able to suppress environment noise such as wind, engine and street noise, while picking up on your voice. Boomless is just better!

37. The sound is bad through my GPS, what should I do?

The GPS may default to HFP for streaming music if you activate music playback manually from the GPS versus through your UCLEAR unit.To get the GPS device to stream through A2DP/AVRCP, please double tap the power button twice on your UCLEAR to trigger the A2DP profile first, and then start the music from the GPS. Note: We recommend that for best performances that a phone should be the main source for Phone calls, Music, GPS. Tethering connection can affect sound quality.

38. Can I pair my UCLEAR with another brand Bluetooth communication system?

YES! With our latest firmware update you can pair with other brand Bluetooth communication systems. The HBC100 Plus series, HBC200 series and AMP series are now cross brand compatible, so you can connect to other brand helmet communication systems. UCLEAR plays well with others! Note: With the amount of technology needed to play with other brands, cross brand connections will limit functionality.

39. Which UCLEAR is right for me?

The difference between UCLEAR products has to do with intercom range and the number of users, as well as mounting options that come in the package. So to determine which option is right for you, first determine how many people you want to connect with and what intercom range you need. The HBC100: series offers 2 person intercom, has a range of 30 feet and is meant for rider to rider to rider to passenger communication. This series is NOT firmware upgradable. The HBC100 PLUS: series offers 4 person intercom and has a range of .30 miles between users. This series is firmware upgradable. The HBC200 series: can connect 10 or more people and offers up to .40 miles between 10+ users. This series is firmware upgradable. Amp Series: Refer to this AMP link to see the difference in the AMP series.

40. How long is the battery life of a UCLEAR unit?

With a full charge, UCLEAR units will have about 10+ hours of talk time and 400 hours (16.6 days) of standby time.

41. How does the noise suppression technology work?

UCLEAR Digital’s advanced digital microphone array technology eliminates the need for a close-talk microphone. UCLEAR’s superior approach to noise suppression separates wanted audio information from unwanted noise with the use of multi stage processing, using multiple Digital Signal Processing (DSP) based algorithms. Its purpose is to create an extremely versatile algorithm to handle a variety of noise types and other acoustical issues that would normally disrupt mobile communications. This technology forms a beam or “sweet spot” around your mouth that picks up your voice while intelligently eliminating environmental noise such as engine or wind noise.

42. What does full duplex mean?

Full Duplex means that instead of traditional two-way walkie-talkie communication where only one person can talk at any given time, conversation back and forth between several people can happen at the same time. Similar to today’s cell phone conversations. The UCLEAR Digital intercom function allows for conversation to occur simultaneously.

43. Will UCLEAR work with my phone?

UCLEAR Digital units will work with most Bluetooth capable phones or devices. UCLEAR supports the latest Bluetooth version, EDR and profiles A2DP/AVRCP, HFP, HSP and intercom. Check your phone manual to see if it supports these Bluetooth profiles.

44. I can hear fine, but the person calling me can't hear me?

The main problem with callers not hearing your voice has to do with positioning of microphones. They must be installed symmetrically on both sides of your helmet, pointing forward and at the same angle. If the positioning of the microphones are off 5% or more, voice quality will start to suffer. If off 15% or more, your voice will sound muffled or distant.

45. What UCLEAR units are compatible with each other?

1. The HBC100 can only connect to another HBC100. 2. The HBC100 Plus is compatible with other HBC100 Plus units, HBC200 units and HBC200 HD units. 3. AMP Series units can connect to all AMP series units, HBC 100 PLUS, HBC200 and HBC200 HD units. * Please note that the units must be on the same firmware version in order to pair correctly.